Create the Simulation

Create the simulation by first importing the model and the material definitions into the 3DEXPERIENCE platform and then opening the model in the appropriate app.

This task shows you how to:

Before you begin: Download the model from the Dassault Systèmes Knowledge Base article, Sample Data: Heat Exchanger Efficiency.

Import the File into the 3DEXPERIENCE Platform

  1. Open a native client on the 3DEXPERIENCE platform.
    The technique that you use to open a native client depends on your installation and environment. For example, you can open a client from a desktop shortcut or from an email invitation to a 3DDashboard.

    For more information, see the Getting Started guide.

  2. Import the model into the 3DEXPERIENCE platform by doing the following:
    1. From the top bar, select Add > Import....
    2. Specify the Location and the Filename of the 3D XML file.
    3. Expand the Options section, and select As New.
    4. Enter your name in the Duplication string field.

      The object that you import includes this string as a prefix to its name, which makes it easier to find your file in the database.

    5. Click OK.

      The imported model includes a material definition for water, the fluid flowing through the heat exchanger. You assign this material definition to the fluid region later in this example.

  3. In the Operation Report dialog box, click OK.
  4. From the Navigation section of the action bar, click Open .
    The 3D area displays the heat exchanger model.

Initialize the Simulation

  1. From the Compass, click Fluid Scenario Creation.
    The app creates a simulation.
  2. From the Setup section of the action bar, click Simulation Properties .
  3. Enter Heat Exchanger Efficiency as the Title, and click OK.

    Renaming your simulation allows you to identify it easily when you search for it.

  4. Right-click the 3D area, and select Assistant from the context menu.

    The Assistant guides you through creating and running your simulation. It lists commonly used commands and indicates whether your simulation meets the minimum requirements to run. All commands listed in the Assistant are also available in the action bar.

  5. Select Share > Save > Save All, and save your work.

    Tip: You can also press Ctrl+S to save your work. Save your work often.