Installing Connector for Solid Edge Client in UI mode

This section shows you how to install Connector for Solid Edge Client in UI mode.

Before you begin:
  • Ensure that Integration Exchange Framework Client is installed.
  • There are separate installers for 32 bit and 64 bit systems. Ensure that the correct installer is used.
    Note: Ensure that the correct installer is run based on the 32 or 64 bit SolidEdge tool even if the operating system is 64-bit. For example, run the 32 bit installer for 32-bit SolidEdge even if the operating system is 64-bit.
  • Close any running instances of Solid Edge before proceeding installation of Connector for Solid Edge Client.
  1. Run setup.exe.
    The Welcome dialog box appears.

    Close all the running instances of Solid Edge before proceeding for successful installation.

  2. Click Next
    The legal process information dialog appears.
  3. Click Next
    The Select Technical Product dialog box opens.

    The default value is EGC - Connector for Solid Edge Client.

  4. Click Next.
    Summary of the details entered from step 1 to 3 is displayed.
  5. Click Install.
    Connector for Solid Edge Client is installed at the same location as Integration Exchange Framework Client. On successful installation, the Setup Complete dialog box opens.

Connector for Solid Edge Client is available along with Integration Exchange Framework Client under the name Dassault Systemes xCAD Connectors 3DEXPERIENCE R2022x in the Control Panel.

The installation log files are created at target path\InstallData\log\CODE\intel_a\ENOVIA_EGC.media-yy_mm_dd-hhmmss+0530 or target path\InstallData\log\CODE\win_b64\ ENOVIA_EGC.media-yy_mm_dd-hhmmss+0530.