Creating Conical Bends

Conical Bend lets you create a bend on non connected walls, and with a different radius value at each end of the bend.

Before you begin: Create two perpendicular walls.
  1. Select the first wall as Support 1 and the second wall as Support 2.

    The left and right endpoints are identified. You can click the arrows on the geometry to invert the walls orientation.

  2. Enter the radius values for each end of the conical bend.

    The Angle box is locked. If you click Preview, the value is updated, indicating the angle value between the two walls between which the bend is computed.



 

See Also
More help on this topic