Creating Rolled Walls

Rolled Walls lets you create an extrusion of a circular arc or a closed circle.


Before you begin: Create a circular arc or a closed circle.
  1. In the Profile box, select the circular sketch and define the limits.

    Both lengths indicate the location of Limit 1 and Limit 2.

  2. Select the profile positioning option:
    OptionDescription
    Bottom Sets the profile at the bottom position of the wall thickness.
    Middle Sets the profile at the middle position of the wall thickness.
    Top Sets the profile at the top position of the wall thickness.
  3. To define both limits, specify the limit type.
    OptionDescription
    Dimension Generates the wall using a length.
    Up to plane Generates the wall up to the defined plane.
    Up to surface Generates the wall up to the defined surface.
    Mid plane Generates the wall using a length that is equally divided between both limits of the extrusion. It is available only with Limit 1.
  4. Optional: To extend the material on both sides of the sketch, click Mirrored Extent .