Creating Walls from a Sketch

Wall lets you create a wall from a sketch. The first wall is known as the reference wall.

Before you begin: Define the Sheet Metal parameters and sketch a profile.
  1. Select the sketch as the profile.
  2. Select the profile positioning option:
    OptionDescription
    Bottom Sets the sketch at the bottom position of the wall thickness.
    Middle Sets the sketch at the middle position of the wall thickness.
    Top Sets the sketch at the top position of the wall thickness.
  3. To offset the wall, enter a value in the Offset box or drag the manipulator in the 3D area.

 

See Also
More help on this topic