Creating Walls from Edges

Wall on Edge lets you create a box from an existing reference wall.

Before you begin: Create a wall.
  1. Select an edge of the wall.

    A wall from an edge cannot intersect the selected edge.

  2. To define the wall parameters, do the following:
    1. Select the Height Type and define the corresponding parameters.
    2. Enter a value for the wall angle.

      By default, it is perpendicular to the plane containing the edge.

  3. Optional: To offset the wall, define a Clearance Mode and enter a value.

    It corresponds the bend radius value. The reference wall remains unchanged even if this values is modified.

  4. Optional: To create the wall with a bend, select With Bend.


 

See Also
Creating Walls from Edges