Setting the Handles Attenuation Factor

You can set the attenuation value for the handle's displacement. The attenuation defines the ratio between the mouse displacement and the actual displacement of the handle in the geometry.

See Also
In the Knowledge Base
Calculation method of "Attenuation Ratio"
In the App Options panel, click one of the four attenuation ratio:
  • No Attenuation to use the attenuation value set as default.
  • Low Attenuation to use the power of 1 default attenuation value.
  • Medium Attenuation to use the square default attenuation value.
  • High Attenuation to use the cubic default attenuation value.

The default attenuation factor is set at Me > Preferences > App Preferences > 3D Modeling > Styling > FreeStyle Shape Design, General tab, Tuning section, Coefficient box.

Each attenuation value equals the previous value (in the dashboard) multiplied by the default value.