Smoothing Meshes

Mesh Smoothing avoids very noisy scans produced from planar sections, segmentation, or the reconstruction of wavy curves or surfaces and/or of very high order.

  1. Select a mesh with manifold edges.
  2. Select the type of smoothing:
    • Select Single effect if there is no sharp edge on the mesh to process.
    • Select Dual effect to reduce the distance between outliers and the surface, and reduce the erasing of small radii.
  3. Set Coefficient to balance the effect of the new theoretical position in comparison with the original position.
  4. Select Max Deviation check box to keep the displacement under the set value.
  5. Click Apply.

    Mesh Smoothing is iterative: Click Apply again to smooth the proposed mesh.