Configure Settings on 3DSpace

This section describes how to enable HTTPS on 3DSpace.

This task shows you how to:

Enable HTTPS in config.xml

Context: To switch from HTTP to HTTPS:

Edit your config.xml file.
Specify the https attribute to true
```
<PROVIDER name="XL" https="true"/>
```
Specify your Exalead CloudView server configuration:
```
<SERVER host="A" baseport="19000" />
```
Note: If you do not specify the https attribute value, its value is false by default.

Verify the JDK path of the Tomcat running 3DSpace.
By default, it is located at <3DSpace_install_path>/<OS>/code/serverjre.
Verify that a keystore file named cacerts exists under <3DSpace_install_path>/<OS>/code/serverjre/lib/security.
To import all Exalead CloudView certificates to the cacerts keystore, using the default storepass changeit, run the following command:
- If you installed the 3DSpace server with the embedded TomEE, run:
```
keytool -import -file yourcvhost-cvdefault.cert -alias youralias -keystore <3DSpace_install_path>/<OS>/code/serverjre/lib/security/cacerts -storepass changeit
```
- If you installed the 3DSpace server with your own TomEE (not the embedded TomEE), run:
```
keytool -import -file yourcvhost-cvdefault.cert -alias youralias -keystore ${tomcat_JRE}/lib/security/cacerts -storepass changeit
```
You can now search your 3DSpace application through an SSL-enabled Exalead CloudView server.