Creating a Boundary Partition

Use Boundary Partition to create boundary sections to stabilize inputs for the detailed design.

  1. Select the Reference Direction used to compute the wall of the part and the die.
  2. Select the boundary or the surface to process.
  3. Select the elements to cut the boundary.
  4. Select the type of the output curve.
  5. Enter the Parameter values.
  6. Click Apply.
    The Boundary Sections are listed with their Type.

    Type can be Offset or Transition. If the type is Offset, the value is listed under Flange Extension.

  7. Select one Boundary Section and
    1. Change its type from the list below.
    2. For Offset, edit the value in the Flange Extension.

A Boundary Partition node is created. It contains

  • The parameters used for the partition.
  • The Boundary Sections with their type.