Performing a Depth Analysis

Use Depth Analysis to check the depth of the part.

  1. Select an axis system (stamping direction).

    The Z-Axis represents the cutting tool axis.

  2. Select the surface or 3D curve to analyze with respect to the Allowed Depth.
  3. Verify the completion status of key indicators.
  4. Under Analysis Details, select an item under the list to inspect it.

    Note: The Current Maximum Depth is displayed.

  5. Optional: Modify the Allowed Depth value.
  6. Activate more options.
  7. Select a Color Mode
  8. Set the View Mode for the analysis.
  9. Set the Mesh Behavior.
  10. Go to Extract Geometry to convert the results of the displayed analysis to dead geometry.