Creating a Styling Fillet

You can create the styling fillet between two surfaces.

Important: This functionality is only available with the FreeStyle Shape Design license.

This task shows you how to:

Before you begin: Open a 3D shape containing two surfaces having a common edge.

Create a Styling Fillet between Two Surfaces

You can create a styling fillet between two surfaces using the different continuity and fillet types.

  1. From the section of the action bar, click Styling Fillet .
  2. Under the Options tab:
    1. In the Continuity area, click continuity.
    2. In the Fillet Type area, cancel the selection of Variable \ Partial Fillet .
  3. Select two surfaces.

    Input surfaces can be intersecting or non-intersecting.

    In case of non-intersecting surfaces, specify the edges of the input surfaces to extrapolate so that they intersect. A message is displayed asking you to give the input edges for extrapolation. The input edges must be the border edge of the input surface and must be G1 continuous. If the edges are not G1 continuous then an error message is displayed. When the given input edges for extrapolation fail to find an intersection between the given set of input surfaces, an error message is displayed.

    Two vector arrows, the G0 continuity symbol and a radius value appear.

  4. Click Apply.
    A G0 fillet appears.

  5. In the Continuity area, click continuity.
    • The G2 continuity symbol appears.
    • The fillet color changes to red indicating that it does not represent the current selections in the dialog box.


  6. Click Apply.

    A G2 fillet appears.



    Note: Drag the Robot to the geometry of an existing styling fillet to directly modify the fillet radius. In this case, the feature is selected and the handle with the radius parameter is displayed. You need to drag the handle to set the required radius value.

  7. To shrink the fillet, modify the start and end points of the intersection curve:
    1. In the Fillet Type area, click Variable\Partial Fillet .
      The intersection curve between the input surfaces is displayed and at the fillet extremities, handles with a radius value appear.
    2. Drag the handles along the intersection curve towards the center of the fillet.
    3. Click Apply.
    The fillet result is shrinked to the new handle positions.

  8. Adjust the fillet radius to vary linearly along the length of the fillet:
    1. Click one of the radius values and change its value in the Edit dialog box.
    2. Click Apply.
    The radius varies linearly from one end of the fillet to the other.

    Note: You can snap the handle to define the intermediate radius position of a curve intersection:
    1. Hold down Shift or click Snap on Edge in the App Options panel.
    2. Move the handle over a curve to display the position of the intersection between this curve and the guiding curve of the handle.
    3. Release the left mouse button to snap the handle on the intersection.

    If a curve does not intersect the guiding curve of the handle, the snapped point on the guiding curve is at a minimum distance from the selected point on the curve.

  9. Adjust the fillet radius to vary non-linearly along the length of the fillet:
    1. Click one or several positions on the intersection curve.
      An additional handle is created at each position.
      Tip: To remove an additional handle drag it to the end of the fillet or select Delete this Point in the context menu.
    2. Define different radii at each inserted position.
    3. Click Apply.
    The radius varies non-linearly from one end of the fillet to the other.

    Note:
    • When multi-domain intersection is found between Select surface set 1 and Select surface set 2, this option is not available.
    • The surfaces involved by the selected elements in Select surface set 1 must be G1 continuous to generate a continuous variable fillet.
  10. Click OK.
    A styling fillet is created in the tree under the PartBody node.

Manage Multiple Results in Fillet

You can handle multiple results after the filleting operation. The multi-result management allows you to keep either one or all sub-elements created.

  1. Click Styling Fillet .
  2. Select the two input surfaces.


  3. Click OK in Styling Fillet dialog box.
    The following options are available:
    • keep only one sub-element using a Near/Far allows you to keep only one sub-element by selecting a reference element and choosing the nearest/furthest sub-element from this reference element. The Near/Far Definition dialog box is displayed allowing you to make this selection.
    • keep only one sub-element using an Extract allows you to keep only one sub-element by selecting an extract of the element. The Extract Definition dialog box is displayed.
    • keep all the sub-elements allows you to keep all the sub-elements created.

    For more information, see 3D Modeling: 3D Modeling Core: Generative Shape Design: Using Tools: Managing Multi-Result Operations.

  4. Select keep all the sub-elements.
  5. Click OK.
    All the created fillets are kept.