Defining Impacts

You can define impacts, either from the impacting components, or from the impacted components. Note that the impacts of the Nesting Guides were created when you placed them.

Click Play to watch the video:

  1. From the Component Use section of the action bar, select Component Impacts
  2. Select the two eyebolts.
  3. Make sure Automatic Clash is selected.
    1. Click Apply.
      The impacts are computed from the automatic detection of clashes between visible elements.
  4. Hide the eyebolts to see the impacts.
  5. Select Impacted by Components and the 3D shapes under the two plates.
    Impacting products are detected and displayed in the 3D. A ghost display is applied to non impacted elements. The impacts are computed from the automatic detection of clashes between visible elements.
  6. Click Apply and validate.
  7. Hide the CapScrews to see the impacts.