Creating Circular and Rectangular Markers

You can annotate your documents using rectangular and circular markers.

Before you begin: Open an existing review.
See Also
Modifying Marker Shape and Position
Modifying Graphical Properties
  1. From the Review section of the action bar, click Rectangle or Circle .
    Note: If the live customization mode is activated, the marker will be created with graphical properties of the last created marker.
  2. Click in the 3D area.
    The marker is created in the 3D area.

  3. Select the marker and drag the control points to define the size of the marker.


  4. Select the marker and drag its central control point to translate it to the required position.

    You can link a geometric marker to a geometry by either creating the marker on the geometry or translating it on the geometry.

    For more information, see 3DEXPERIENCE Native Apps: Native Apps Common Services: User Interface: Using the Robot.

    Notes:
    • When you move a geometry to which a marker is linked, the marker moves with the geometry.
    • When you switch a geometry to which a marker is linked to no-show space, the marker is not displayed. (Note: In the tree, you must select the Product and not the 3D Shape.) When the marker is set to no-show, switching the linked geometry to show state will not alter the no-show state of the marker.

      When the linked geometry is not loaded in the session, the marker is not displayed.

    • The markers linked to an unloaded object are not displayed in the 3D area. However, these markers are displayed in the tree with the mask. For a marker with multiple leaders, only the leader linking to the unloaded object is hidden. The marker is hidden only when all of its linked objects are unloaded.