You can convert a feature or body using direct-edit tools and
use the
Robot,
scale handle, toolbar commands, constraints, and dimensions to edit the feature
or body.
Warning:
After you convert a feature or body to a direct-edit
feature, you cannot change it back to a parametric feature.
Note:
Only solids can be converted to direct edit. You cannot convert
surfaces.
Select a face in the
work area.
From the Features section of the action bar, click Convert to Direct-Edit
.
The Convert to Direct-Edit dialog box appears, and
indicates the selected face or feature and the associated body or feature to be
converted. The features to be converted are listed in the dialog box.
Optional:
Click
Recognize fillets if you want to include
fillets in the direct edit.
Optional:
Click
Recognize chamfers if you want to include
chamfers in the direct edit.
Optional:
Click
Select Body if you want to include the entire
body of the selected face in the direct edit.
Click
.
When you select the direct-edit feature in the Design Manager, the
Move/Offset Faces toolbar appears in the work area.
On the toolbar, select one of the following:
Move or Copy
Moves, rotates, or copies the selected
face, feature, or body. Drag Robot handles to move or rotate. Ctrl +
drag Robot handles to copy.
Offset
Offsets the selected face. Drag Robot handles to offset.
Use the Robot handles and toolbar commands to edit the feature or body.