Setting Standard Parameters

This section provides information about setting standard parameters.

Sheet Metal for Hydro-formed Parts parameters are located in the AerospaceSheetmetalDesign.xml file available inMe > Preferences > Standards> General. For more information, see Sheet Metal for Hydro-formed Parts: Display.

This page discusses:

Graphic Properties
Visibility

Graphic Properties

This topic provides you with more information about graphic properties.


Parameter	Value	Description
BTL Base Feature > Color	Color	Defines the color of the BTL base feature.
BTL Base Feature > Linetype	Integer	Specifies the linetype of the BTL base feature.
BTL Base Feature > Thickness	Integer	Specifies the line thickness of the BTL base feature.
BTL Base Feature > Trimmed	Yes/No	Specifies whether or not to display characteristic curves on the unfolded view of drawings from parts that are trimmed by the unfolded view of the sheetmetal solid. By default, the value is No.
BTL Base Feature > Broken Display	Yes/No	Specifies whether or not to display two parts of the characteristic curves on the unfolded view of drawings, by breaking the curves for a given length from the start and end vertices of the wire. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
BTL Base Feature > Breaking Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Broken Display parameter is set to Yes.
BTL Base Feature > Clearance	Yes/No	Specifies whether the clearance should be displayed or not. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
BTL Base Feature > Clearance Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Clearance parameter is set to Yes.
BTL Support > Color	Color	Defines the color of the BTL support.
BTL Support > Linetype	Integer	Specifies the linetype of the BTL support.
BTL Support > Thickness	Integer	Specifies the line thickness of the BTL support.
BTL Support > Trimmed	Yes/No	Specifies whether or not to display characteristic curves on the unfolded view of drawings from parts that are trimmed by the unfolded view of the sheetmetal solid. By default, the value is No.
BTL Support > Broken Display	Yes/No	Specifies whether or not to display two parts of the characteristic curves on the unfolded view of drawings, by breaking the curves for a given length from the start and end vertices of the wire. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
BTL Support > Breaking Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Broken Display parameter is set to Yes.
BTL Support > Clearance	Yes/No	Specifies whether the clearance should be displayed or not. By default, , the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
BTL Support > Clearance Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Clearance parameter is set to Yes.
IML > Color	Color	Defines the color of the IML.
IML > Linetype	Integer	Specifies the linetype of the IML.
IML > Thickness	Integer	Specifies the line thickness of the IML.
IML > Trimmed	Yes/No	Specifies whether or not to display characteristic curves on the unfolded view of drawings from parts that are trimmed by the unfolded view of the sheetmetal solid. By default, the value is No.
IML > Broken Display	Yes/No	Specifies whether or not to display two parts of the characteristic curves on the unfolded view of drawings, by breaking the curves for a given length from the start and end vertices of the wire. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
IML > Breaking Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Broken Display parameter is set to Yes.
IML > Clearance	Yes/No	Specifies whether the clearance should be displayed or not. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
IML > Clearance Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Clearance parameter is set to Yes.
OML > Color	Color	Defines the color of the OML.
OML > Linetype	Integer	Specifies the linetype of the OML.
OML > Thickness	Integer	Specifies the line thickness of the OML.
OML > Trimmed	Yes/No	Specifies whether or not to display characteristic curves on the unfolded view of drawings from parts that are trimmed by the unfolded view of the sheetmetal solid. By default, the value is No.
OML > Broken Display	Yes/No	Specifies whether or not to display two parts of the characteristic curves on the unfolded view of drawings, by breaking the curves for a given length from the start and end vertices of the wire. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
OML > Breaking Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Broken Display parameter is set to Yes.
OML > Clearance	Yes/No	Specifies whether the clearance should be displayed or not. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
OML > Clearance Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Clearance parameter is set to Yes.
Second OML > Color	Color	Defines the color of the second OML.
Second OML > Linetype	Integer	Specifies the linetype of the second OML.
Second OML > Thickness	Integer	Specifies the line thickness of the second OML.
Second OML > Trimmed	Yes/No	Specifies whether or not to display characteristic curves on the unfolded view of drawings from parts that are trimmed by the unfolded view of the sheetmetal solid. By default, the value is No.
Second OML > Broken Display	Yes/No	Specifies whether or not to display two parts of the characteristic curves on the unfolded view of drawings, by breaking the curves for a given length from the start and end vertices of the wire. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
Second OML > Breaking Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Broken Display parameter is set to Yes.
Second OML > Clearance	Yes/No	Specifies whether the clearance should be displayed or not. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
Second OML > Clearance Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Clearance parameter is set to Yes.
CLB > Color	Color	Defines the color of the CLB.
CLB > Linetype	Integer	Specifies the linetype of the CLB.
CLB > Thickness	Integer	Specifies the line thickness of the CLB.
CLB > Trimmed	Yes/No	Specifies whether or not to display characteristic curves on the unfolded view of drawings from parts that are trimmed by the unfolded view of the sheetmetal solid. By default, the value is No.
CLB > Broken Display	Yes/No	Specifies whether or not to display two parts of the characteristic curves on the unfolded view of drawings, by breaking the curves for a given length from the start and end vertices of the wire. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
CLB > Breaking Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Broken Display parameter is set to Yes.
CLB > Clearance	Yes/No	Specifies whether the clearance should be displayed or not. By default, the value is No. Note: This parameter applies to a given characteristic curve only if the Trimmed parameter is set to Yes.
CLB > Clearance Length	Integer (in mm)	Specifies the distance to split the corresponding characteristic curve if the Clearance parameter is set to Yes.

Visibility

This topic provides you with more information about visibility.

Flange Features


Parameter	Value	Description
Flange > Brake Formed > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of brake formed flanges.
Flange > Brake Formed > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of brake formed flanges.
Flange > Brake Formed > BTL Support > Folded View	Yes/No	Specifies whether the BTL support should be projected in 2D folded views of brake formed flanges.
Flange > Brake Formed > BTL Support > Unfolded View	Yes/No	Specifies whether the BTL support should be projected in 2D unfolded views of brake formed flanges.
Flange > Brake Formed > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of brake formed flanges.
Flange > Brake Formed > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of brake formed flanges.
Flange > Brake Formed > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of brake formed flanges.
Flange > Brake Formed > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of brake formed flanges.
Flange > Brake Formed > Second OML > Unfolded View	Yes/No	Specifies whether the Second OML should be projected in 2D unfolded views of brake formed flanges.
Flange > Brake Formed > CLB > Unfolded View	Yes/No	Specifies whether the CLB should be projected in 2D unfolded views of brake formed flanges.
Flange > Hydro-press Formed > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of hydro-press formed flanges.
Flange > Hydro-press Formed > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of hydro-press formed surfacic flanges
Flange > Hydro-press Formed > BTL Support > Folded View	Yes/No	Specifies whether the BTL support should be projected in 2D folded views of hydro-press formed flanges.
Flange > Hydro-press Formed > BTL Support > Unfolded View	Yes/No	Specifies whether the BTL support should be projected in 2D unfolded views of hydro-press formed flanges.
Flange > Hydro-press Formed > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of hydro-press formed flanges.
Flange > Hydro-press Formed > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of hydro-press formed flanges.
Flange > Hydro-press Formed > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of hydro-press formed flanges.
Flange > Hydro-press Formed > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of hydro-press formed flanges.
Flange > Hydro-press Formed > Second OML > Unfolded View	Yes/No	Specifies whether the Second OML should be projected in 2D unfolded views of hydro-press formed flanges.
Flange > Hydro-press Formed > CLB > Unfolded View	Yes/No	Specifies whether the CLB should be projected in 2D unfolded views of hydro-press formed flanges.

Stamping Features


Parameter	Value	Description
Flanged Hole > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of flanged holes.
Flanged Hole > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of flanged holes.
Flanged Hole > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of flanged holes.
Flanged Hole > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of flanged holes.
Flanged Hole > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of flanged holes.
Flanged Hole > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of flanged holes.
Bead > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of beads.
Bead > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of beads.
Circular Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of circular stamps.
Circular Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of circular stamps.
Surface Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of surface stamps.
Surface Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of surface stamps.
Flanged Cutout > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of flanged cutouts.
Flanged Cutout > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of flanged cutouts.
Flanged Cutout > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of flanged cutouts.
Flanged Cutout > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of flanged cutouts.
Flanged Cutout > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of flanged cutouts.
Flanged Cutout > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of flanged cutouts.
Stiffening Rib > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of stiffening ribs.
Stiffening Rib > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of stiffening ribs.
Curve Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of curve stamps.
Curve Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of curve stamps.
User Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of user stamps.
User Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of user stamps.
Other Stamping Types > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of other stamping types.
Other Stamping Types > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of other stamping types.