Using a Runout Joggle Formula

You can import and use a runout joggle formula.

All the joggle parameters valuated by a length (Depth, Runout, Start Radius, End Radius, Clearance) can be managed with pre-defined formulas stored in design tables.

See Also
Creating Joggles
Joggle Tables
  1. Create a table in a .txt or .xls file.
  2. From the Model section of the action bar, click Sheetmetal Parameters .
    The Sheetmetal Parameters Definition dialog box appears.
  3. Select the Joggles tab.
  4. In the Joggle Formula list, select Design Table.
    A dialog box appears asking you whether you want to proceed with the creation or not.
  5. Click Yes.
    The Joggle Formula Standard Table dialog box appears.
  6. In the From Search tab, enter the name of the .txt or .xls file and click Search.
    The joggle formula table is displayed under the Name box.
  7. Click OK in both dialog boxes.
  8. Select a formula.
    The parameters of the boxes are updated accordingly.
  9. Click OK.
    The parameters are applied on the feature.