Creating Local Corner Relieves

You can create local corner relieves and local corner relieves with a profile.

This task shows you how to:

See Also
About the Creation of a Local Corner Relief

Create a Local Corner Relief

You can create a local corner relief.

Before you begin: Create a web and two surfacic flanges.
  • Unfold the 3D shape.
  1. From the Refine section of the action bar, click Corner Relief .
  2. Select the supports.
    A notch is sketched on the web profile between the two flanges of the fillets so that they will not intersect.

  3. Enter a radius value.

    The radius is equal to the bend radius and the thickness.

  4. To modify the circle's center, in the Center box, select a point.

    By default the corner relief center is located at the intersection of the bend axes.

  5. Click OK.


Create a Local Corner Relief with a User Profile

You can create a local corner relief with a user profile.

Before you begin: Create a web, two surfacic flanges, and a sketch.
  1. From the Refine section of the action bar, click Corner Relief .
  2. From the list of available profiles, select User Profile .
  3. Select the supports.
  4. Select the sketch.

    The red arrow lets you choose the direction of matter to remove. Click it to reverse the direction.

  5. Click OK.


  6. From the standard area of the action bar, click Fold/Unfold .