Reinforcement

The Reinforcements section of the action bar provides commands for creating rebars, checking for interferences in a single rebar layer or between rebars layers, generating a rebar report including relevant information for each type of rebar and each rebar layer, showing or hiding wire and layers.

This page discusses:

Rebar Creation
Creates standard or parametric 3D rebar geometry from various creation modes like template, wire selection, strap, and mesh.
See Creating a Rebar.
Rebar Group
Creates groups of rebar layers in the same section. These layers follow the same pattern.
See Creating Rebar Groups in Sketch Mode.
Rebar Transformation
Performs geometric transformations on the Rebar Layer features such as translate, rotate, symmetry, split without losing the rebar specifications.
See Performing General Transformations.
Rebar Accessories
Adds couplers between rebar layers or rebar split.
See Adding Couplers on Rebars.
Rebar Interference
Checks interferences between two sets of rebar layers or within the same rebar layer.
See Running an Interference Analysis.
Barmark Management
Manages the numbering of rebar layers.
See Creating a Rebar.
Export Rebar Report
Exports rebar layer information in a report to the format of your choice.
See Generating a Rebar Report.
Show Rebar Layer
See Flyout for Show Rebar Layer.
Show Rebar Wire
See Flyout for Show Rebar Wire.
Show 3D Tags and Labels
See Flyout for Show 3D Tags and Labels.

Flyout for Show Rebar Layer

Show Rebar Layer
Shows all the rebar layers in the active part.
See Creating a Rebar.
Hide Rebar Layer
Hides all the rebar layers in the active part.
See Creating a Rebar.

Flyout for Show Rebar Wire

Show Rebar Wire
Shows all the rebar wires in the active part.
See Creating a Rebar.
Hide Rebar Wire
Hides all the rebar layers in the active part.
See Creating a Rebar.

Flyout for Show 3D Tags and Labels

Show 3D Tags and Labels
Shows all the rebar wires in the active part.
See About Rebar Creation.
Hide 3D Tags and Labels
Hides all the rebar layers in the active part.
See About Rebar Creation.