Configuring Line and Bar Charts

You can configure line and bar chart parameters. Configuration changes are only applied to the chart you have made them on and they only appear on your own 3DEXPERIENCE platform.

This task shows you how to:

Before you begin: Click Menu and select Configure.
See Also
Using Line and Bar Charts

Hide or Display Chart Series

You can hide or display chart series. If the legend is displayed, you can also hide or display series directly from the chart. For more information, see Hide or Display Chart Series from the Legend.

Hide a Series

Clear the check box located next to its name.

Display a Series

Select the check box located next to its name.

Select the Chart Type

You can change the default chart types used to represent the series.

  1. From the Representation drop-down list, select the chart type of your choice for each series.
  2. Click Save.

Display Statistical Lines

You can display an average and a median line for each series.

  1. To display an average line, select the check box from Average column.
  2. To display a median line, select the check box from Median column.
  3. Click Save.

Select the Stacking Option

You can set column and area type series to stack on top of each other instead of overlapping.

  1. From the Stacking list, select one of the following option:
    • Disabled.
    • Normal. Series are stacked on top of each other in order.
    • Percent. Fills the plot area and draws each point of data with a relative percentage to all the points in the same category.
  2. Click Save.

Hide Legend

You can hide the legend from the chart.

  1. Clear the Display legend box.
  2. Click Save.

Add a Comment

You can add a comment to your configuration.

  1. In the Comment box, enter text.
  2. Click Save.

Restore Configuration to Default Values

You can restore the chart configuration to the default values.

Click Restore.