Primary Area

The primary area of the Annotation section provides commands for creating text, text with leader, table, balloon, bill of materials, dimensions and so on.

This page discusses:

Flyout for Creating Texts
Flyout for Creating Tables and Balloons
Flyout for Creating Dimensions
Flyout for Creating Tolerances
Flyout for Creating Dress-up and Graphic
Flyout for Creating Axis and Thread


	Text See Flyout for Creating Texts.
	Table See Flyout for Creating Tables and Balloons.
	Dimensions See Flyout for Creating Dimensions.
	Datum Feature See Flyout for Creating Tolerances.
	Area Fill Creation See Flyout for Creating Dress-up and Graphic.
	Center Line See Flyout for Creating Axis and Thread.
	Element Positioning Aligns annotations or views.
	Page Layout Creates a frame and a title block. Note: The command appears in the Annotation section only when you are editing the sheet background of a detail sheet. If you are working with a regular sheet, the command appears in the View Layout section.

Flyout for Creating Texts


	Text Creates a text.
	Text with Leader Creates a text with leader.

Flyout for Creating Tables and Balloons


	Table Creates a table.
	Bill of Material Inserts a bill of materials from a product in the current view.
	Multiple BOM Creates a multiple bill of materials table.
	Balloon Creates a balloon.

Flyout for Creating Dimensions


	Dimensions Creates dimensions.
	Chained Dimensions Creates chained dimensions.
	Cumulated Dimensions Creates cumulated dimensions.
	Stacked Dimensions Creates stacked dimensions.

Flyout for Creating Tolerances


	Datum Feature Creates a datum feature.
	Datum Target Creates a datum target.
	Geometric Tolerance Creates a geometrical tolerance.
	Roughness Symbol Creates a roughness symbol.

Flyout for Creating Dress-up and Graphic


	Area Fill Creates an area fill.
	Picture Inserts a picture in a drawing representation.
	Arrow Creates a geometrical tolerance.

Flyout for Creating Axis and Thread


	Center Line Creates a center line.
	Center Line with Reference Creates a center line with a reference.
	Thread Creates a thread.
	Thread with Reference Creates a thread with a reference.
	Axis Line Creates an axis line.