Modify Section

The primary area of the Modify section provides commands for modifying the surface and wireframe geometry.

This page discusses:

Flyout for Join
Flyout for Merge Clouds
Flyout for Translate


	Tessellation Creates a tessellation from surfaces or solids. See Tessellating Objects.
	Join See Flyout for Join.
	Merge Clouds See Flyout for Merge Clouds.
	Extract Extracts a face or a surface edge. See Extracting Elements.
	Translate See Flyout for Translate.
	Offset Creates a surface that is offset from a reference surface. See Creating Offset Surfaces.
	Split Splits a surface or wireframe element using a cutting element. See Splitting Geometry.
	Variable Fillet... Creates a fillet whose radius varies along the edge. See Creating Edge Fillets Using Variable Radii.
	Unfold Unfolds a ruled or unruled surface. See Unfolding a Surface.
	Matching Constraint Connects surfaces using a range of continuity constraints. See Creating a Matching Constraint.
	Converter Wizard Converts curves and surfaces into NUPBS curves and surfaces, and modifies their properties. See Using Converter Wizard.
	Control Points Modifies a curve or a surface by manipulating control points. See Using Control Points.
	Extend Makes a curve longer by extending one or both of its end points. Makes a surface bigger or smaller by extending its boundaries. See Extending Shapes.
	Close Surface Closes a surface. See Creating a Close Surface.

Flyout for Join


	Join Assemble adjacent curves or surfaces to one element. See Joining Curves or Surfaces.
	Curve Smooth Fills the gaps and smoothes tangency and curvature discontinuities. See Smoothing Curves.
	Untrim Restores the trimmed curve or surface to its original shape. See Restoring a Surface or Curve.
	Disassemble Disassembles multi-cell curves or surfaces into mono-cell, or mono-domain curves or surfaces. See Disassembling Shapes.

Flyout for Merge Clouds


	Merge Clouds Merges several clouds of points into one. See Merging Clouds of Points.
	Disassemble Data Disassembles multi-cells clouds into mono-cell ones See Disassembling Data from a Cloud of Points.
	Split

Flyout for Translate


	Translate Translates point, line or surface elements along a vector. See Translating Geometry.
	Rotate Rotates geometry about an axis. See Rotating Geometry.
	Symmetry Transforms geometry using a mirror symmetry with respect to a reference plane, line, or point. See Performing a Symmetry on Geometry.
	Scaling Scales geometry. See Transforming Geometry by Scaling.
	Affinity Transforms geometry by affinity. See Transforming Geometry by Affinity.
	Axis To Axis Transforms elements positioned according to a given axis system into a new axis system. See Transforming Elements from an Axis to Another.