Moving from the Mezzanine to the Floor Level

You can use the Sketcher app to move the track between different planes.

  1. Expand P&F Conveyor Station 2 then double-click on Part Body
    to open the 3DEXPERIENCE | CATIA Part Design app.
  2. Click Positioned Sketch.
    The Sketch Positioning dialog box appears.
  3. Click zx plane from the P&F Conveyor tree.
    Use the 3DEXPERIENCE Sketcher app to move the track from the mezzanine to the floor level.

  4. Click Line in the action bar.
  5. Draw a line from the point of origin to -50 (using dimensions from Defining the Layout. Draw a line from the point of destination to -20.


  6. In theaction bar, select the Spline menu and click Connect . Select the two lines to connect them.


  7. Exit the Sketcher app.
  8. Share > Save > Save All