Retrieving the Kinematic Mechanism, the 3D Piping Model, or the 3D HVAC Model

You can retrieve the physical model from the generated Modelica model. You must retrieve the physical model to retrieve the kinematic mechanism, the 3D Piping Model, or the 3D HVAC Model, it cannot be retrieved alone.

Before you begin: The current model is a Modelica model generated from a physical model.
Important: This command is not applicable to a schematic P&ID model, it is not a physical model.
See Also
Generating a Modelica Model from a Kinematic Mechanism
Generating a Modelica Model from an Engineering Model
  1. You can retrieve the physical model by any of the following:
    • From the Behavior Tools section of the action bar, click Open Physical Model .
    • From the Package Browser, right-click a class in the generated model and select class name (path) object > Open Physical Model .
    The Open Advanced dialog box appears.
  2. In the Open Advanced dialog box, you can do the following:
    1. To open references with expanded structure of all parts, including children, select Which expanded children.

      By default, this option is not selected.

    2. You can select which representations are opened to the references:

      • To open with 3D Shape representations, select that option.
      • To open without any representation, select that option.
      • To open with all representations, select that option.

      By default, the option With all representations is selected.

    3. Click OK.
      The root physical product model from which the Modelica class has been generated appears in a new tab.