Adding Storage Condition Details

You can add storage requirements and handling information to the device identification object. You can add multiple storage and handling requirements.


Before you begin: You must be on the Storage Condition Page.
See Also
Adding Clinically Relevant Size Details
  1. From the page toolbar, click Enable Edit.
  2. From the page toolbar, click Insert new row.
    An empty row appears.
  3. Enter the following details.
    Column Name Description
    Name Enter the name of the storage condition.
    Title Enter the descriptive name of the storage condition.
    Type Enter the item type on this row.
    State Enter the current lifecycle state of the storage condition.
    Condition Type Select a storage condition type. You can select Handling Environment Atmospheric Pressure, Handling Environment Humidity, Handling Environment Temperature, Special Storage Conditions, Storage Environment Atmospheric Pressure, Storage Environment Humidity, or Storage Environment Temperature.
    Shelf Life Select the shelf life of the product in number of days.
    Handling Type Select the handling type of the product.
    Condition Enter if there are any specific conditions are required for the product.
    Low Level Type the minimum value of the storage condition type.
    High Level Type the maximum value of the storage condition type.
    Unit of Measure Select a unit of measure.
    Description Enter the additional details of the storage condition.
  4. Click Save.
    The details are saved.
  5. Click Disable Edit to exit edit mode.

The storage condition is added to the device identification object.