Using Collections and Local Clash Limits

You can define one or more collection of objects (products, resources and items) and assign local clash limits to these collections. These limits are taken into account by the solver to find a collision-free Track. Collections and local clash limits are defined in the Multi-Clearance tab of the Path Finder panel.


Before you begin: The following scenario illustrates how to set local clash limits to find a Track on a collection of objects. Content is a simple assembly comprising five products in a simulation context.
See Also
Multi-Clearance Tab
  1. Select a Track and, in the Simulation section of the action bar, click Path Planning .
  2. Click Path Finder at the right edge of the work area to open the Path Finder panel.
  3. In the Multi-Clearance tab of the panel, click the '+' button to add a collection of objects.
    The List of Objects panel appears.
  4. Select objects to be included in the collection from the work area or tree.

    You can select products, manufacturing assemblies and/or resources.

  5. Click OK in the List of Objects panel to define the collection.

    You can define other collections in the same way.

  6. In the Multi-Clearance tab of the Path Finder panel:
    1. Select the check box corresponding to the desired collection.
    2. Set the Local Clash Limits mode to Contact allowed for the selected collection.
  7. Click Find Track in the context toolbar.
    A collision-free Track is found and a message is issued to confirm this.