Managing the Features of Curved Parts

You can add, delete, and modify the features of curved parts.

Click Play to watch the video:

  1. In the tree, select a manufacturing part.
  2. From the Authoring section of the action bar, click Edit Features .
  3. In the Manufactured Part panel, click the Reference Line tab.
  4. In the auxiliary viewer, select a cross.
    A reference line creates.
  5. In the Manufactured Part panel, select the new reference line in the Reference Line list, then select the Formed Plate in the Manufactured Part list.
    The reference line for the selected cross transfers to the flattened resulting product.
  6. Select Manufactured Part in the list and click Swap Marked Side.
    The reference line type changes from a straight line to a dotted line in the auxiliary viewer.
  7. Select the reference line in the list and click Remove.
    The reference line removes.
  8. Select the Formed Plate in the Manufactured Item list.
    The transferred reference line removes.
  9. Change the Number of Roll Lines.
    The specified number of toll lines creates on each patch. See also Roll line radius and orientation support.
  10. Multi-Patch clear, and click Apply.
    The specified number of roll lines creates only for the plate surface.