Manikin Interactions Update

You can select this and if there is no manikin in preselection, update at the same time, all the manikins that are defined as Active along with their selected interaction. If a manikin is selected before the command start, then only this selected manikin updates when its state is Active.

The following topics discuss:

This page discusses:

See Also
Human Interactions List and Dialog Box

Failure Visualizations

Failures in solving a Human Interface.

Each failure in solving a Human Interface within its distances and angles limitations, in the work area by a red line showing the exceeding distance and or angle.

Human Interactions Failure Panel

An interactive panel also displays failing results.

An interactive panel also displays failing results along with other information such as the manikin, the related Human Interaction, and the Human Interface. You can minimize this panel.

Manikins Human Interactions Human Interfaces Distances
Manikin2 HumanInteraction_passenger HumanInterface_Disk 317.854mm
Manikin2 HumanInteraction_passenger HumanInterface_Cylinder 295.713mm
Manikin4 HumanInteraction.3 HumanInterface_disk2 293.304mm
Manikin4 HumanInteraction.3 HumanInterface_Sphere 17.33mm
Close

Selecting a line in this panel zooms to the representation in the work area and changes its color from red to teal. The selection of another entry in the list returns it to red.



Closing this panel stops the command.