- Part profile
- Part and
rough stock profiles are required. They is
specified by selecting edges either directly or after selecting the
By Curve
context menu
command in red part area.
See
Selecting Edges and Faces to Define Geometry.
Multiple areas are not managed. If a profile with multi-domains
is selected manually or by the automatic rough stock selection capability, only
a single area is taken into account for machining.
- Rough Stock Offset
- Specifies a virtual displacement of the rough stock
profile.
- Part offset
- Specifies a virtual displacement of the part
profile.
- Axial part offset
- Specifies a virtual displacement of the part profile along the
spindle axis direction.
The following image shows offset of a part (located initially
at Zero offset) due positive and negative Axial part offset value. This is
applicable in general for any
Orientation
Strategy parameter .i.e. External, Internal
etc.
Location of Part (initially located at Zero Part axial
offset value) due to Negative, Positive Part Axial offset.
- Negative Part axial offset
- Zero Part axial offset
- Positive Part axial offset
- Spindle radial axis
- Negative 1 offset
- Spindle axial axis
- Radial part offset
- Specifies a virtual displacement of the part
profile in the radial axis direction.
Offsets is positive or negative with any absolute value. The
global offset applied to the part profile is the resulting value of the normal,
axial and radial offsets.
The following image shows offset of a part (located initially at
Zero offset) due positive and negative Radial part offset value. This is
applicable in general for any Orientation Strategy parameter .i.e. External,
Internal etc.
Location of Part (Initially at Zero Radial Part offset)
due to Positive and Negative Radial Part offset value
- Positive Radial part offset
- Zero Radial part offset
- Negative Radial part offset
- Spindle radial axis
- Spindle axial axis