Tool Parameters

Assembly: Shows the assembly name. You can also click:


Icon	Description
	Creates or edits a tool assembly. Visible if Tool Assembly Authoring is checked in Me > Preferences > App Preferences > Simulation > Machining Resources.
...	Selects any tool assembly from the current manufacturing cell
	Searches a tool assembly from a reference tools file or a catalog
	Searches a tool assembly from database

Tool: Shows the tool. You can also click:


Icon	Description
...	Selects any tool assembly from the current manufacturing cell
	Searches a tool assembly from a reference tools file or a catalog
	Searches a tool assembly from database

Note: Search results are based on the type of the operation.

Additional feeds and speeds configuration filtering is available. This filter is based on the feeds & speeds configuration specified for the part operation during setup. Tools with at least one feeds & speeds configuration that correspond to the values specified during setup will be displayed in the search results.

Local Tool Gage: Specifies the value of the tool gage. You can also click Enable/disable edit of local tool gage. When you enable this option, you can edit the values for the local tool gage.

If you enable the Display tool at option, the tool assembly is displayed based on the local tool gage value that you specified.
The behavior for modification of the local tool gage value is as follows:
- If the Enable/disable edit of local tool gage option is disabled, then no local gage value is considered and the gage value is obtained from the main resource.
- If the option is enabled, then, the upper limit for gage value is the Overall length of the tool. If you specify a local tool gage value higher than the overall length of the tool, then value is reset to the overall length.
- If you specify the local tool gage value lower than the lower limit (overall length - maximum gage of holder), then value is reset to the overall length.
Note: This option is only available in the Tool Parameters tab of milling operations panels.

Display tool at:

Default position - this displays at the Default position,
User-defined position - selecting this, you can set your defined position using the ... button.

Assembly, Tool, Insert

You can specify external, internal, frontal, or inclined machining according to the type of area to machine. The following tooling may be used:

Internal , External , and Frontal Groove insert-holders with groove Round , and trigon inserts.
For more information about tooling configuration, please refer to the Trigon Insert Used on a Groove Insert-holder or Round Insert Used in a Groove Holder.
External and Internal insert-holders with round inserts.