Removing the Tool Path Trace

You can remove the tool path of a machining operation after it is simulated.

This task shows you how to:

Remove the Tool Path in Activities Tree

You can remove the tool path using Activities tree context menu.

  1. Go to Me > Preferences > App Preferences > Simulation > Machining NC Machining Apps Common Services > Simulation tab, and select the Display Tool Path during Simulation checkbox to see the trace of the tool path display during simulation.
  2. Simulate the entire machine operation by following the steps outlined in Simulating NC Tool Paths.
    The Tool Path is displayed as shown below.

  3. Right-click any Machining Operation or Manufacturing Program in the Activities tree.
    Select Remove Tool Path from the context menu to remove the tool path display.

Remove Tool Path Trace in 3D View

You can remove the tool path using context menu in 3D view.

  1. Close the Simulation Player action bar
  2. Right-click segment of the tool path you want to remove, and then select Remove Tool Path Trace in the 3D view.