R2022x GA
- Over Length Definition on Pipe Segment
- Additional type for Mid side on over length feature allows you to have multiple
extra lengths on a pipe with the Auxiliary Viewer. Thus, the
bending operation cuts the pipe off right with this new information
For more
information, see About Manage Bent Pipes with Mid Over Length. Benefits: Create, update, and
delete mid over length features through Feature Manager and
Auxiliary Viewer.
- CKE Parameter Editor Migration
- User assistance components like spinner areas that are used to create/modify/remove
features in the Feature Manager command were available. Now you
can input a new value with a new unit for the value type.
For more information, see
Managing Straight Pipes.
R2022x FD01 (FP.2205)
- Start and End Over Length for Cutting Length Computation
- This supports the required start and end over length information that is
incorporated for cutting length computation. This is the length required to be cut out
of a raw pipe is based on the cutting length.
For more information, see Managing Bent Pipes with Over Length. Benefits: Cutting length information is based on the following features and
addresses by the Feature Manager and Extract Workshop Documents commands.
- Pipe length
- Margins (positive / negative)
- Root gap
- Mid Over Length
- Start and End Over Length (new)
- Loading Resulting Products on Demand
- Control the automatic loading of the resulting product while loading MBOM in session
related to an MLF through the preferences. It helps to optimize the data loading time
and later you can load the on demand based on the requirement. In , Heavy Industry Fluidic Fabrication, Resulting
Products, select Automatically load Resulting
Products when loading your resulting products.
For more information,
see About Loading Resulting Products.
|
