Primary Section

The primary area of the Analysis and Output section provides commands for Realistic Robot Simulation, Probes in Manufacturing Simulation.

This page discusses:

Flyout for Probes Verification
Flyout for Realistic Robot Simulation


	New Manufacturing Simulation Create a simulation from product, resource, or PPR context content. See Creating a Simulation


	New Manufacturing Scenario This command is not available in a PPR Context. See Creating a Manufacturing Scenario


	Data Readout Probe See Flyout for Probes Verification


	Simulate and Generate Results Please see Defining and Visualizing Simulation Scenarios in the Process Flow Simulation guide.


	RRS Connect Connects to a DELMIA RCS Server running locally or across the network. See Flyout for Realistic Robot Simulation

Flyout for Probes Verification


	Data Readout Probe Creates one or more data readout probes to keep track of specific data when running simulations. See Creating a Data Readout Probe
	Measure Probe This command is not available in a PPR Context. See Creating a Measure Between Probe
	Interference Probe This command is not available in a PPR Context. See Creating an Interference Probe
	Section Probe This command is not available in a PPR Context. See Creating a Section Probe
	Camera Viewer Probe Creates a camera probe that focuses on either a particular part or on what happens from the vantage of a particular camera mounting point. See Creating a Camera Viewer Probe
	Motion Trace Probe Uses a simulation trace to trace the movement of objects in a simulation. See Creating a Motion Trace Probe
	Fault Monitor Probe Launches the Fault Monitor Manager panel, used to manage resources that are monitored for faults during simulation. Run a simulation and identify all the potential issues, using the Fault Monitor. Review individual issues by navigating through the Fault report, and get a 3D view of each problematic situation.

Flyout for Realistic Robot Simulation


	RRS Connections Manager Connects multiple robots to DELMIA RCS servers, and allows you to view their status and connection parameters. See Connecting RRS Using RRS Connections Manager
	RRS Connect Connects to a DELMIA RCS Server running locally or across the network. See Connecting RRS Using RRS Connect
	RRS Operations View the robot stamp, load and save RCS data, and display parameters and controller attributes. See RRS Operations
	RRS Status Saves the model with RRS enabled. See Saving the Model with RRS Enabled
	Define RRS Event Allows the RCS module to notify the simulation when simulation-defined events occur during RCS motion execution. See About RRS Events
	Display RRS Events Displays all the active RRS events of the selected robot and the attributes. See About RRS Events