Duerr EcoRC2 RRS Servers

The DUERR EcoRC2 3.XX interface supports all versions of the DUERR EcoRC2 RCS. Unless otherwise indicated, the data on this page applies to all DUERR EcoRC2 RRS server versions.

This task shows you how to:

See Also
Duerr EcoRC2 RRS Interface
Duerr EcoRC2 RRS Profiles/Attributes

Installing the Duerr EcoRC2 RRS Server

The following steps are required to ensure proper Duerr EcoRC2 RRS server operation. RRS initialization could fail if they are not performed.

  1. On the RRS server machine, copy the desired version of the Duerr EcoRC2 RCS module (i.e. the rcsdb01.dll file) and also the Delmia Duerr EcoRC2 RCS Server executable (the rcssrv_DUERR_ECORC2__3.XX.exe file) into <DELMIA_RCS_Top>\DUERR_ECORC2__3.XX\bin folder.
  2. Copy the DUERR RCS data files (in particular, CONST.RC) into subfolders created under the <DELMIA_RCS_Top>\DUERR_ECORC2__3.XX\data folder.

Running the DUERR EcoRC2 RRS Server and RRS Connecting Delmia Robots

The following steps are required to ensure proper Duerr EcoRC2 RRS server operation.

  1. On the RRS Server machine, if not already done, create the folder C:\tmp.
  2. Invoke the following in a Command shell to start the Duerr EcoRC2 RRS Server: 

    erase c:\tmp\rcssrv_DUERR_ECORC2__3.XX.pid
cd /d <DELMIA_RCS_TOP>\DUERR_ECORC2__3.XX\bin
rcssrv_DUERR_ECORC2__3.XX.exe -tcp 3900

  3. Use the following RRS connection parameter settings when RRS connecting Delmia robots to the Duerr EcoRC2 RRS Server:

    Relative Robot Path=DUERR_ECORC2__3.XX\data\<subfolder containing the CONST.RC file>