Creating Centered Parallelograms

You can create the parallelogram, if you know its center.

This task shows you how to:

See Also
Creating Parallelograms
  1. Optional: Select the Dimensional Constraints and the Geometric constraints from the Sketch section of the action bar.

    Performing this step results into a centered parallelogram with two parallelism constraints as long as two symmetrical constraints which are based on the two selected lines

  2. From the Sketch section of the action bar, click Centered Parallelogram .
  3. Select a line or an axis.
  4. Select another line or an axis.
  5. Move the pointer to specify the dimensions.
    The parallelogram is created. It is centered on the intersection point of the two lines. Its edges are parallel to the selected lines.