About the Copy/Cut-and-paste Capability Management for Cables

Supported Objects

The copy/cut-and-paste capability and update behavior are available for cables and their related objects.

The supported objects are the following:

Cables
Cable routes
Devices defined as cables extremities
Junction devices
Parent electrical physical system of cables
Parent electrical physical system of dispatched cable routes
Electrical branch geometries of routed cable routes
Subassemblies

Repair Management

After moving your cables or their related objects, the update and repair operations are automatic. In some cases, repairing your cable structure requires a manual update.

Tree Masks

If a repair is required, the following icons appear on your cables in the tree:


	Related objects are not loaded.
	Related objects are not loaded, and repair is required.
	Repair is required.

Note: An additional mask can appear to indicate that the object is not editable:

Behavior

If automatic repair is impossible or if content is not loaded, a manual update is required.

Recommendation: If you need to load content, a manual loading is recommended.

If the manual update is not successful, repairs need to be done manually using one of the following commands:

Cable: to edit the properties of a cable. For more information, see Creating a Cable.
Associate Junction Point: to edit a junction device. For more information, see Associating Junction Points with Cables.
Link Review: to analyze and repair relations manually. For more information, see Checking Connectivity.

Note: You can also repair your network using methods available in the Enterprise Knowledge Language. For more information, see Electrical Methods.