Using the Simple View of the Extract Report

You can use the Simple view of the extract report to have an extensive view of the outcome of the extract process.

This task shows you how to:

Before you begin: Extract the 3D area content to display the Extract Report.
See Also
Extracting the Geometry

Display the Results

The Simple view displays the extract results in a table.

  1. In the Extract Report panel, select Simple.
    A table listing the content impacted by the extract appears.
    Note: If the Simple view is displayed after the selection of a section from the Pie-Chart Report view, the information in the table is filtered according to the selected section.

    The results are displayed in the following columns:

    • Electrical Geometry: Provides the name of the electrical geometry containing the extracted object
    • Element: Provides the name of the object.
    • Status: Provides the extract status. It can be Done, Error, or Warning.
    • Message: Provides errors or warnings occurred during the extract.

  2. Filter the information and customize the table display according to your needs.
    For more information, see Managing the Extract Results.

Export the Report

You can export the results displayed in the Simple view and generate a .csv file.

  1. From the Synchronization Report panel, click Generate Report.
    A .csv file is generated. It displays the Electrical Geometry, Element, Status, and Message information.
    Important: If you have applied filters, only the filtered view is exported in .csv format.
  2. Save the file on your computer.