Reversing and Mirroring Symbols

You can reverse or mirror symbols. When you mirror symbols, you actually make a copy of them.

Before you begin:
  • Create a logical reference.
  • Under the logical reference, create two components.
  • Create symbol representations for both components.
  • Create a diagram view and place the symbol representation.
  • Create a diagram view containing symbols.
See Also
Modifying Symbols Position and Orientation
  1. From the Layout section of the action bar, click Manipulate Symbols .
    The App Options panel appears.
    Note: The mode selected to modify the symbol position remains active when selecting Manipulate Symbols again.
  2. Select the symbols to be mirrored.
    The Manipulation Options Chooser dialog box appears. The handle appears and the selected symbols are highlighted.

  3. To modify the center of the rotation, drag the middle point of the compass to the desired location.
  4. Select one of the following options to create object instances or new object references in the tree:
    • Instantiate: The references of all the selected objects are instantiated under the same context as that of the selected objects. Modifications on the orientation or the position are applied to the instantiated objects.
    • Duplicate: The references of all the selected objects are duplicated under the same context as that of the selected objects. Modifications on the orientation or the position are applied to the duplicated objects.
    • Business Rule: The references of all the objects which can be duplicated or instantiated are defined through the Schematic_ComputeInstantiateDuplicateOptionsRule business logic. This business logic is associated with the Rule for Instantiate/Duplicate Option resource.

    Notes:
    • If symbols from different systems have been selected in Step 2, the Instantiate and Duplicate options are not available. For the Business Rule option, the List_Context_Change_Options parameter must be set to 1.
    • When no business rule is associated with the Rule for Instantiate/Duplicate Option resource, the Business Rule option is not available.

  5. If you have selected the Duplicate option, enter a prefix for the duplicated references names.
  6. Choose along which axis the new symbols are created:
    • Click the y-axis manipulator to translate the objects along the y-axis.
    • Click the x-axis manipulator to translate the objects along the x-axis.


  7. Click OK to validate the new symbols.

    In the diagram view, the objects are reversed or mirrored according to the selected type of manipulation. In this example, the initial symbols have been instantiated, and then mirrored along the x-axis.