Associating Nets/Net Groups with Wires/Cables

You can create or remove links between a net/net group and one or more existing wires or cables.

Note that the following associations are available:

  • A net: with one or several wires
  • A net group: with one or several cables
  • A wire with only one net
  • A cable with only one net group

Before you begin:
  • Define a harness component (Audio Harness).
  • Create a net (Net1).
  • Define two wires (Wire1 and Wire2).
See Also
About Electrical Logical Systems
  1. From the Edition section of the action bar, click Net/Wire Links .
  2. In the tree or in the diagram view, select the net Net1.

    Important: If the selected net is already associated with wires or cables, they are highlighted in the tree.

  3. Select the two wires Wire1 and Wire2 to insert them under the net.

    Warning: It is not possible to select a wire/cable that is already associated with another net.



  4. To remove a link, click the wire.


  5. Deactivate Net/Wire Links .

    Tips:
    • You can deactivate Net/Wire Links by clicking anywhere in the diagram view, if the representation is active.
    • You can use a validation business rule when you associate/un-associate to or from a net/net group to wires/cables. For more information about the business rule, see Validate Net/Net Group Association Links (ELE_ValidateAllocationNet)