| Level
|
The number in the first column indicates the
level of the item. All Level 1 items are top-level; all Level 2 items are
subitems of the Level 1 item immediately above it.
|
| Ref Des
|
The Reference Designator ID is used on
Printed Circuit Cards to indicate the location an electronic component
is to be inserted. Reference Designators are usually values like R1, R2,
R7, C1, or C5 (R for resistor and C for capacitor). The BOM can show
Reference Designators as a single value (for example, R3), a
comma-separated sequence of values (for example, R2, R3, R4), a
range of values (for example, R3-R6), or a mix of all three types.
The page displays the Reference Designator value as it was
entered when the BOM was created. You can use the format of
Reference Designators to collapse or expand the BOM display.
|
| Component Location
|
Similar to Reference Designator, but is used
to give additional location information and/or can be used by industries other
than electronics. For example, it can be used to indicate which motor is
failing all the time, the one by the window or the one by the furnace.
|
| Active Change
|
An icon
 is included next to any part, drawing print, CAD model,
or
CAD drawing that has an active change object
connected.
|
| EBOM History
|
An icon
 is included next to all part names that are connected
with the EBOM History relationship. These are shown in the same row shading as
the original part. For a given connected part, the revisions connected by the
EBOM History relationship appear immediately below the revisions connected by
the EBOM relationship.
|
| Name
|
Name of the part included in the BOM. Click
any Name in this column to view the part.
|
| Rev
|
Part revision number or code.
|
| Type
|
Part type or subtype.
|
| Description
|
Details about the part.
|
| State
|
The current state of the part in its
lifecycle.
|
| Qty
|
The quantity of the selected part included in
the BOM.
|
| U of M (Unit of
Measure)
|
LB (pound), IN (inch), GA (gallon), FT
(feet), EA (each).
|
| Usage
|
Standard, Reference, Per Sales Order, or As
Required.
|
| Equivalent
|
Names of
MEPs for the
enterprise part.
|
| Manufacturer
|
Name of the manufacturer of the MEP. |
| ** Location Details: If the
part has connected
manufacturer equivalent parts, then the location
details are shown, otherwise the following columns are blank.
|
| Status
|
Indicates whether the location has been
approved to allocate the part in support of production: required, authorized,
or not authorized.
|
| Preference
|
Indicates if the location is preferred or not
preferred.
|