Removing Components

You can remove components placed on a flexible board. As a result, the placement data of the components are automatically removed from the tree.

See Also
Creating a Flexible Board
Folding/Unfolding Flexible Circuit Boards
  1. In the work area, select a component.
  2. From the Edition section of the action bar, click Place and Move Component .
    The Component Placement dialog box appears.
  3. Under Position, select the Unplaced option, and then move the Robot.
  4. Click OK to validate.
    The placement data of the selected component are automatically removed from the tree:
    • The publication on the board pointing a moving axis to axis.
    • The body (under axis to axis transformation) containing the necessary information for computing the board position.
    • The engineering connection pointing the component and the board.

Thanks to this option, you don't have to delete manually each element in case of error (if the component placed is not the good one for example), you just have to remove the instance of the component in the tree.