Replacing by a New Major Revision

You can replace the current revision by a new revision.

Note: In Functional & Logical Design, there is no minor revision.

You can replace the revision of the following objects:

  • Requirement
  • Function or logical component
  • Functional or logical behavior representation
  • Picture
  • 3D representation
  • Sheet under a layout
  • View under a sheet

Before you begin:

To use this command, your object must be:

  • Saved
  • At the convenient maturity level

See Also
About Ports and Interfaces During a Replace Action
  1. Select a function or logical component.
  2. From the Edition section of the action bar, click By New Major Revision .

    Tip: This command is also available from the context menu.

    At the end of the process, the Reroute Implement Relations dialog box appears to show you all implement relations you need to reroute.
    Important: You can reroute the following implement relations:
    • Implement relations (reference/reference) in which the replaced functional or logical component is implemented and not used as a context for contextual implement relation
    • Implement relations pointing ports, without context of the replaced component
  3. In the Reroute Implement Relations dialog box, click OK, to reroute all selected implement relations.

    Tip: By default, all implement relations are selected to be rerouted. To unselect the reroute of an implement relation, click on the corresponding line.

    The Reroute Implement Relations dialog box closes and the implement relations are rerouting according to your modifications.