Filtering Configured Requirements

You can apply a filter to configured requirements to display only the structure corresponding to the defined effectivity.

This task shows you how to:

Before you begin: In a requirement structure:
See Also
About Configured Requirements

Filter with Predefined Criteria

From the context menu, you can filter requirements with predefined criteria.

This command is described in the Configured Engineering User's Guide.

  1. Right-click the root requirement and select Filter.
    The Filter on 'ObjectName' dialog box appears.
  2. Expand the Configuration and Change node, and double-click the Predefined node.
    The Define Configuration Filter Criteria dialog box appears.
  3. Clear the Search on the root object only check box.

    Important: This option must be cleared to filter the complete requirement structure.

  4. Browse to select your configuration criteria.
  5. Click OK to close the Define Configuration Filter Criteria dialog box.
    The filter is applied on the requirement structure.