Generic Commands in FMEAs | |||||
|
| ||||
Renaming Elements
| To rename | Actions to be done |
|---|---|
| A cell element such as a failure mode from an FMEA table or a reference table. | Double-click the element in the tile and edit its name. |
| A fallible reference or a failure mode from the Fallible Reference Editor. | Select the element in the editor, press F2, and edit its name. |
| An FMEA table, a reference table, or a template from the Structure Tree. | Select the element in the editor, press F2, and edit its name. |
Removing Referenced Elements
To remove an element from a cell, click the cross located at the upper-right corner of a tile, when you hover over the tile.
Note:
For a cause, you can remove all the elements
located at the right of this cell, at the same time.
The element is removed from the FMEA, but it still exists in the database.
Deleting Elements
To delete a selected element, click Delete
from the Edit section of the action bar.
Note:
The deletion can be refused, if references on elements exist (for example,
bookmarks can reference fallible references).