Associate/disassociate an existing geometry as constructed geometry
(or representing geometry) of a tolerancing feature (User surface and Group of
surfaces) with another existing geometry as represented geometry.
You can associate an existing constructed geometry (or representing
geometry) with another existing geometry. In this case, the constructed
geometry previous association is removed, then associated with the new
selection.
An existing geometry cannot be its constructed geometry (or
representing geometry) and represented geometry at the same time.
Query the direct or inherited constructed geometry of a given
tolerancing feature.
Remove existing constructed geometry, but not its indirect
representing geometries.
One or several representing geometries may be referenced by a
represented geometry, but a representing geometry element can be referenced by
only one represented geometry.
Creating a manual constructed geometry allows you to associate an
existing geometry as constructed geometry of a tolerancing feature (User
surface and Group of surfaces).
The lifecycle of manually constructed geometry is not managed by the
app.
For this, you can select:
A 3D annotation: the corresponding tolerancing feature is
retrieved.
A geometrical element: the corresponding tolerancing feature is
retrieved or created.
From the
Annotation
section of the
action bar, click
Constructed Geometry Management
.
Select
the datum.
The
Constructed Geometry Management dialog box
appears.
Select the reference plane as shown to
define the gage plane of the related surface of the
annotation.
The
Constructed Geometry Management dialog box is
updated, the constructed geometry is created in manual mode: the associativity
is managed by the user.
Click
OK.
Click
Constructed Geometry Management
.
Re-select
the previous datum.
Click
Indirect representing>> in the dialog box.
The
Constructed Geometry Management dialog box
displays the indirect representing of the previously created constructed
geometry.