Creating Ramps

Let's create access ramps along the perimeter walls of the pit. You previously defined the ramp parameters that include ramp rate, the ramp width, and the minimum radius values.

  1. From the Surface Mine section of the action bar, click Ramp .
  2. In the tree, select the bottom bench for the ramp start.
  3. In the Ramp dialog box, specify the bottom entry point, select an existing point. For example, point [place holder for point name].
  4. From the Orientation options, select clockwise.
  5. From the Design options, select Inside profile.
  6. Select the exit bench materializing the ramp end.