Graphic Properties

Graphic lets you modify graphic properties of a geometrical element.

Select the Graphic tab to access properties.

This page discusses:

Fill

Color
Defines a filling color for the selected element.
Transparency
Applies filling transparency by moving the slider.

Edges

Color
Defines the color that is used for edges.
Linetype
Defines the linetype (dotted, dashed, etc.) used for edges.
Thickness
Defines the thickness used for edges.

Lines and Curves

Color
Defines the color used for lines and curves.
Linetype
Defines the linetype (dotted, dashed, etc.) used for lines and curves.
Thickness
Defines the thickness used for lines and curves.

Points

Color
Defines the color used for points.
Symbol
Defines the symbol used for points.

Global Properties

Shown
Shows the geometrical element.
Pickable
Makes the geometrical elements selectable. If this check box is cleared, the geometry is not selectable anymore.
Note: When you create elements using the no pick mode (that is, Pickable check box is not selected), you can make some of them pickable again. Press Ctrl + F to open the Find dialog box and search for the elements to be modified.

You can make all the elements in a view pickable again. Right-click the view fame and select xxx object > Force Pick Mode.

Low intensity
Display the selected geometrical element using a lower intensity.

See Editing Graphic Properties.

Layers
Adds a layer to the selected geometry.

You can inherit the layers from a 3D geometry into a drawing sheet.

Important:
  • In the Standard Definition dialog box, select the Drafting node. Under ViewDressup > 3DInheritance node, from the Layer list for each of the feature (Wireframe, Solid, and 3DPoints), select Yes to inherit the layers of a 3D geometry into a drawing (available through Me > Preferences > Standards > generativeparameters category).
  • The 2D view must be created using the generative view styles.

See Using Layers.

Rendering style

Defines the rendering style (Transparent, Wireframe, Shading, or Shading with edges) you want to apply to the selected element, provided that this element supports rendering styles.

See Editing Graphic Properties.

Important:

In some cases, changing the color of an element provides unexpected results, as the color of related elements is changed as well. For example, if you change the color of a table frame, the font color of the table also changes. In this case, a workaround is to change the Font Properties after having edited the graphic properties.