Modifying Insulation

Existing insulation can be modified using the Modify Insulation command.

Before you begin: Open an object in which you want to modify the insulation of rigid or flexible route.
See Also
About Applying Insulation
  1. From the Fluid Design section of the action bar, select Insulation Mode as process mode.
  2. From the Selection Options dialog box, select Part Selection .
    For more information about the different selection options, see Selection Options and Process Modes.
  3. Select the insulation to modify.
    The Table Browser dialog box appears.
  4. On the context toolbar, click Modify Insulation > Non-spec Insulation .
    You can also select one of the following options:
    • In-spec Insulation .
    • Out-of-spec Insulation .
    • Use an existing insulation on reference part .
    Note: For more information, see Adding Insulation.
  5. Select the insulation of your choice in the Table Browser dialog box.

The original insulation is modified with the selected one.