Creating Advanced Fillets

You can create fillet surfaces on underlying surfaces.


Before you begin:
  • You must have access to the ICEM Shape Morphing app.
  • Open a 3D shape containing two surfaces having a common edge and one curve lying on one of the surfaces.
See Also
Advanced Fillet Dialog Box
  1. From the Surface section of the action bar, click Advanced Fillet .
  2. In the Fillet Type area, select 2 Supports + Radius.
  3. Select two surfaces with a common edge.
  4. In the Radius Parameters area, specify a Radius and click Apply.
    A fillet surface with the specified radius is created at the two surfaces.

  5. Modify the radius using one of the handles at the surface ends.


  6. In the Fillet Type area, select 2 Supports + 1 Support Curve.
  7. In the Support 1 area, select the Curve box and select a curve on one of the surfaces.
  8. Click Apply to create a fillet surface using the selected support curve as fillet surface edge.