Creating a Patch from Curves

You can create a surface from 2 to 4 curves.

Before you begin: Open a 3D shape containing at least two curves and at least one surface.
See Also
About Patch from Curves
  1. From the Surface section of the action bar, click Patch from Curves .
  2. Select curve 1.
  3. Select surfaces as Support or a plane as Symmetry.
  4. Click in the selection field Curve for Edge 2 and select curve 2 , and repeat this for Edge 3 and Edge 4.
  5. Change the Continuity if required.
  6. Click Apply.